Month: September 2022

What is CIPP Pipe Coating and How Is It Done?

Pipe coating is one of a number of trenchless pipe coating and lining techniques used for sewer line repair when it is possible to utilize a trenchless method.

This technique, called cured-in-place-pipe lining or CIPP, is a fairly easy way that damaged sewer lines can be repaired of cracks or leaks and strengthened overall without digging up the old pipes.

It is a great option for homeowners dealing with sewer leaks, as drain pipe coating repairs are faster, less expensive, and much less invasive than traditional sewer line replacement.

How Is CIPP Done?

How is CIPP coating for pipes put in? The process is very simple and involves only a few steps:

  • Clean the Damaged Pipe - To provide a clean surface on which to apply coatings for pipes, the existing line is first cleaned out of any debris and roots, then flushed through. 
  • Bypass Sewer Line Service - A sewer line bypass is connected at the beginning and the end of the section of drain line to be repaired when the line must still be used during the process. 
  • Vacuum Out Sewer Line - After connecting the bypass, the damaged sewer line will be suctioned with a vacuum to clear out any additional water and debris after cleaning and during the repair process. 
  • Insert Liner Coating - Pulling from the street connection point, a flexible, epoxy-coated felt drain repair coating liner will be slid down through the whole sewer line creating a new interior pipe line.   
  • Cure Liner Coating - Once in place, the pipe coating is then exposed to heat and/or UV light, which will cure it in place, bonding it to the old pipe and hardening it. 
  • Restore Sewer Line Service - After the pipe coating is fully cured the sewer line bypass is removed and normal sewer service can resume.

CIPP Is So Much Better

As quickly and easily as cleaning out the existing drain line, sliding in a liner coating for pipes, and curing that coating, CIPP pipe coating can restore a damaged, leaky sewer in a fraction of the time and cost of excavation.

Best of all, since this technique is so much more convenient than traditional methods, homeowners do not have to worry about their driveways or lawns being dug up or the days-long mess that excavating out old sewer lines can cause. 

Let's Add This Up!

Safer, cleaner, and quicker, CIPP drain repair coating is the best way to repair foul-smelling, leaky sewer lines in as little as one day.Contact a sewer repair service to learn more about trenchless pipe coating techniques including CIPP!

Sinking Foundations – Causes and Solutions

Foundation sinking can be one of the more damaging foundation problems that any homeowner can deal with.

Though minor settling is always normal, more extreme sinking requires immediate foundation repair to prevent possible destabilization of the entire house.

Why does it happen and what can be done about it?

Read on!

What Causes Foundation Sinking?

When signs like sticky windows and doors, uneven floors, cracked basement walls, crooked chimneys, cracked outside staircases, interior dampness, or even water leaking in the basement appear, a sinking foundation is a likely culprit.

It is a common problem in older homes that were built using inferior foundation construction techniques or anywhere the ground was not properly prepared and compacted before a foundation was built on it. 

Foundation sinking happens due to problems with the soil on which the house was built, such as drainage issues, poor soil compaction, soil erosion under the foundation, and soil expansion and contraction that can happen due to weather extremes like droughts, floods, and deep freezes.

As the soil becomes more destabilized and foundations continue to sink and shift, structural damage to the foundation and the entire building can occur.

If no foundation repair is done, a building could suffer so much foundation sinking damage that the danger of collapse becomes very real.. 

What Foundation Repair Methods Help Sinking Foundations?

When dealing with foundation sinking, there are a number of repairs that may be required to solve this issue.

There are three foundation repair methods used to correct this sinking:

  1. Push pier systems for standard foundation.
  2. Helical pier systems for standard foundations.
  3. Slab pier systems for slab foundations.

When installed beneath a sinking foundation that is jacked back up and put back to the correct level, all of these repair solutions stabilize the structure and prevent more sinking and the additional damage that would continue if the shifting and sinking are not stopped.

After a pier system is used to stabilize the structure and prevent more foundation movement, foundation repair addressing cracks and other interior problems can then be performed. 

Don't Ignore Your Foundation Sinking Problems!

Foundation sinking is a very serious problem that can destroy a home over time if not remedied as soon as possible.

Homeowners seeing any of the symptoms noted here, especially if they are slowly worsening over time, should contact a professional foundation repair service and arrange an inspection.

Depending on the cause and severity of the problem, an appropriate repair can be made to stop additional sinking or level the building using a support pier system and other methods.